Home › Certified Flight Instructor Training › North Dakota

Back to Category

Certified Flight Instructor Training in North Dakota

Cities in North Dakota with Aviation Schools:

Certified Flight Instructor Training in North Dakota

Certified Flight Instructor Training in North Dakota

As a new Commercial pilot, the most important next step in your career is to build flight hours through a top Certified Flight Instructor Training Program near North Dakota. As a CFI you can do just that - fly, instruct, earn money and gain flight hours. As you train new pilots, you build valuable flight hours, while being compensated for your time.


Through the Certified Flight Instructor Training in North Dakota, students obtain the knowledge necessary to meet the requirements for FAA exams, and demonstrate through practical and written tests, their ability to operate aircraft as pilot-in-command within the aviation industry. StudentsNorth Dakota will learn the problem-solving skills for flight operations and obtain increased situational awareness with a focus on safety.

Helicopter pilot students gain an understanding of the aerodynamics, components, and flight instruments of the aircraft, specifically those of a Robinson R22 and R44, with the option of Bell 206 B and L series aircraft, including their limitations at high altitude. Instrumentation training will give the student the knowledge to translate information from the aircraft instruments into correct control response in the event of Instrument Meteorological Conditions (IMC).

Helicopter CFI Certificate Program: 30 days and 3 - 30 Flight Hours

The CFI Program Prerequisites:

  • 
Private Pilot Certificate;

  • Commercial Pilot Certificate; and
  • Certified Flight Instructor Certificate.

As a Helicopter Pilot, your Certified Flight Instructor pathway would be to start training for your Commercial Pilot Certificate immediately after obtaining your Private Pilot Certificate. This option is only available to Helicopter Pilots and many schools do not allow this course of training to be taken. I think it is important to gain the skills needed for an Instrument Rating before you begin training as a Commercial Pilot.

Time Received:


  • 180 Hours Dual VFR Flight Training;

  • 5 Hours Dual IFR Flight Training;

  • 15 Solo / Supervised Solo;

  • 113 Hours Ground Instruction; and

  • 100 Hour Pre- and Post- Flight Briefing Instruction.

CFI Training Program Objective

The Certified Flight Instructor Training in North Dakota is designed to train a student pilot from their beginning initial flight through the completion of their Certified Flight Instructor certificate. The CFI Training in North Dakota is designed to prepare students to pass both their written and practical FAA examinations through their private pilot, commercial and certified flight instructor certificates.

The CFI Program teaches student pilots how to fly and then helps beginning instructors understand and apply the fundamentals of instruction. The CFI program prepares student pilots for initial entry-level jobs in the industry.


Included in the CFI Training in North Dakota

Part I - Introduction to High Altitude Flying: With the majority of flight time occurring above 5000ft density altitude (DA), students learn how to determine DA and how high-DA's will affect helicopter performance. Various flight characteristics and weight-and-balance considerations are studied. Training includes the extensive practice of run-on landings, auto-rotations, low rotor RPM, and max performance takeoffs.


Part II - The Mountain Environment: Students learn about how mountain terrain affects environmental conditions. Students are trained in the reconnaissance techniques, as well as, procedures for performing pinnacle and confined area operations at high altitude.

Certified Flight Instructor Careers and Jobs in North Dakota Fixed Wing CFI

Reports to Chief Flight Instructor – Fixed Wing

Job Description Summary: Flight training schools and programs in North Dakota are looking for highly motivated CFI’s and MEL’s to instruct for Fixed-Wing programs all over North Dakota. Qualified Instructors provide flight, simulator, and ground instruction in accordance with Part 61 and 141, FAA regulations, Airmen’s Information Manual, advisory circulars, airport operations, and policies and procedures.

CFI's are responsible for student’s flights, student records, and ensure that each flight course meets course standards, training requirements, and objectives.

Essential Job Functions:

  • Perform those flight instructor duties authorized by the Federal Aviation Regulations in accordance with the approved Training Course Outline.
  • Ensure all students understand and practice all aspects of Upper Limit’s Aviation Safety Program.
  • Regularly schedule each assigned student to ensure satisfactory progress through the course and immediately inform the supervisor of any delays in training or satisfactory progress.
  • Responsible for accurately maintaining all appropriate records to include student training records, student logbooks, and computer records.
  • Ensure that all assigned students as stipulated in the applicable Training Course Outline meet course standards, training requirements, and objectives.Job Description Summary: Flight training schools and programs in California are looking for highly motivated CFI’s and MEL’s to instruct for Fixed-Wing programs all over California. Qualified Instructors provide flight, simulator, and ground instruction in accordance with Part 61 and 141, FAA regulations, Airmen’s Information Manual, advisory circulars, airport operations, and policies and procedures.
  • Initiate stage check requests for assigned students.
  • Responsible for the timely course completion of all flight students assigned, including completion of required paperwork.
  • Monitor the maintenance condition of the training aircraft, and inform maintenance personnel of any questionable items.
  • Recommend curriculum and courseware improvements when appropriate and develop new curriculum or courseware as assigned.
  • File incident reports as necessary to report any observed safety violations, or situations that may affect the safety of flight.
  • Contact and meet with potential new students. Conduct tours of facilities and familiarize customers with Upper Limit’s policies, procedures, and flight training courses.

Attend administrative, standardization, in-service training, and instructor development meetings as assigned.

Minimum Requirements:

  • FAA Certified Flight Instructor and Airplane Single Engine and Multi-Engine Land
  • 200 hours of dual SEL given
  • 50 hours of dual MEL given
  • Must hold a current FAA Class II Medical Certificate
  • C172 S experience with G1000 – minimum 100/hrs
  • Pass ’s initial and on-going drug and alcohol testing program.
  • Aircraft piloting skills, including familiarity with and ability to perform required flight maneuvers and procedures.
  • Knowledge of and ability to apply effective instructional techniques in the classroom and in flight.
  • Knowledge of appropriate Federal Aviation Regulations and related administrative and operational procedures and requirements.
  • Ability to work well under pressure in a fast-paced and noisy environment while exercising sound judgment at all times.
  • Strong customer service skills.
  • Productivity and Performance
  • Perform an average of 40 instructional hours per two-week pay period. Maintain an 80% pass rate for final review and stage checks.

Preferred Qualifications:

  • CFII rating
  • Bravo Airspace experience a plus
  • Density Altitude flying above 5,000 feet
  • Instrument Ground Instructor (IGI) experience a plus
  • Advanced Ground Instruction (AGI) preferred

FAA - A History of Airplane Structures Facts for North Dakota

There are five major stresses to which all aircraft are subjected: Torsion. Torsion is the stress that produces twisting. [Figure 1-14C] While moving the aircraft forward, the engine also tends to twist it to one side, but other aircraft components hold it on course. Thus, torsion is created. The torsion strength of a material is its resistance to twisting or torque.

Aviation Facts - Trim Control Systems for Large Aircraft

Control Systems for Large Aircraft - Mechanical Control

This is the basic type of system that was used to control early aircraft and is currently used in smaller aircraft where aerodynamic forces are not excessive. The controls are mechanical and manually operated. The mechanical system of controlling an aircraft can include cables, push-pull tubes, and torque tubes. The cable system is the most widely used because deflections of the structure to which it is attached do not affect its operation. Some aircraft incorporate control systems that are a combination of all three.


Certified Flight Instructor Training Available in North Dakota

Certified Flight Instructors from North Dakota, find your next job through Aviation Schools Online. Many of the top flight schools in the country use our site to connect with CFIs just like you. Whether you're looking for CFI, MEI, or CFII employment, we're here to match you with the best flight instructor or best flight instructor job available in North Dakota.


Learning to fly in North Dakota should be economical and fun, Wouldn't it be easier to enjoy your training knowing that you will accomplish your goals in the least amount of time and expense? Imagine being a private pilot in as little as 60 days! Not everyone can dedicate the time to commit to this type of training, and I have developed training programs for the budget minded flight school student.

Certified Flight Instructor Courses in North Dakota

The Certified Flight Instructor path is one way for pilots to gain flight time while refining their skills. Instructors will also be able to gain flight hours and experience in order to move on to other opportunities.

To obtain a Flight Instructor Certificate inNorth Dakota, the student-pilot must be at least 18 years or older, hold a commercial or ATP certificate, hold a third-class medical certificate, and pass the FAA written, along with the Check ride.

The student will receive 15 hours of flight training in the right seat to become comfortable and to be able to perform and demonstrate all maneuvers pertaining to flight training. The student will also receive 20 hours of ground training.

Ground instruction includes fundamentals of instructing, technical support areas, pre-flight preparation, a pre-flight lesson on a maneuver to be performed in flight, aerodynamics and the principals of flight, aircraft systems, meteorology and weather data services, airspace, air traffic control, radio communications, Federal Aviation Regulations, aeromedical factors, aeronautical charts, and associated publications, aircraft performance and limitations, basic and radio navigation, night flying procedures, flight planning, flight maneuvers, and ground operations.

CFI Practical Exam in North Dakota

Your initial CFI Practical exam is widely recognized as not only the most difficult of all check rides; but also the most important. ‘Checkride” is a term those in the industry use when talking about the FAA Practical Exam. Passing the Certified Flight Instructor ‘Checkride’, or CFI Practical Exam is the moment where you are finally going to set yourself apart from a ‘student’ role, to a marketable role as a Flight Instructor.

This important milestone is what will allow you to start your career. It is well known that here, in the U.S., your first job as a professional pilot will most likely be as a flight instructor inNorth Dakota. First, we will discuss what it takes to become a Helicopter Instructor Pilot; then we are going to go inside a CFI Practical Exam.

Becoming a Certified Flight Instructor in North Dakota

Where to start, and what it takes to get there? Anyone who has never flown before will start out as a Student Pilot working towards becoming a Private Pilot Certificate holder. You will need to find a Flight School to begin your training. There are several options out there, and choosing the right one for you is a discussion for another time.

Once you complete your Private Pilot Training and you are ready, you will take a Private Pilot Practical Exam. Practical Exams are the same in regards to how the exam is conducted.

Great! You’re Now a Private Pilot…..What’s Next?

Once you become a Private Pilot Certificate holder, your flight training can go one of three ways. One, you can stop training and remain a Private Pilot. Several people in the General Aviation sector take this route. These are likely the people who are fortunate enough to own their own aircraft and all they want is to be able to legally fly.

They have no ambitions of flying for a living and are content simply being a ‘pilot’. However, most of us are doing this because this is what we want to do for a living. This brings us to the other two options in our flight training career. The most common step is to begin your instrument training.

This is where things get ‘serious’. In order to be a Private Pilot Certificate holder with an Instrument Rating, you are going to dedicate yourself to in-depth ground training, simulator training and flight training with a view limiting device.

At this point in your flight training, you are going to learn how to safely fly the aircraft with no outside references by solely relying on your instruments inside the cockpit. This stage of training is what I like to call, the make or break stage. If you complete this invaluable training, you can walk proud because everyone in aviation will know that you are serious about becoming a career pilot.


Interesting Helicopter and Fixed-wing Facts for Bismarck

Sikorsky soon became a successful aircraft manufacturer in his adopted homeland. But his dream was vertical take-off, rotary wing flight. He experimented for more than twenty years and finally, in 1939, flew his first flight in a craft dubbed the VS 300.

The record for the fastest helicopter in the world is held by the Sikorsky X2 which, during a flyby over Florida, United States, clocked 258mph (416kph). But this was beaten recently. On June 7th 2013, the X3 blew through the previous air speed record for helicopters by cruising at 255 knots (293 MPH) during a 40-minute flight over Southern France near Istres.

Fun Helicopter and Airplane Facts for Bismarck

Helicopter Pilot's License:Private pilot certificates allow pilots who are 17 and older to command single-engine aircraft and carry passengers night or day. Eligibility includes 40 flight hours, 20 of them solo. If attending flight school, pilots need 35 on-the-ground training hours, with another 35 in the air, 15 of those hours flown solo.


Interesting Helicopter and Fixed-wing Facts for Dickinson

Igor Sikorsky is considered to be the \father of helicopters not because he invented the first. He is called that because he invented the first successful helicopter

The record for the fastest helicopter in the world is held by the Sikorsky X2 which during a flyby over Florida United States clocked 258mph (416kph). But this was beaten recently. On June 7th 2013 the X3 blew through the previous air speed record for helicopters by cruising at 255 knots (293 MPH) during a 40-minute flight over Southern France near Istres.

Helicopter Facts for Dickinson

In order to fly, an object must have “lift”. Lift is what pushes something upwards. Lift is made by wings (rotors). Wings have a curved shape on top and are flatter on the bottom. This specific shape makes air flow over the top of the wing faster than under the bottom of the wing. The faster air on top of the wing makes suction on the top of the wing and the wing moves up. Airplanes get lift from their wings. A helicopter's rotor blades are spinning wings. A helicopter moves air over its rotor by spinning the blades. The rotor makes the lift that carries the helicopter up. One problem associated with helicopter rotor blades occurs because airflow along the length of each blade differs widely. This means that lift and drag fluctuate for each blade throughout the rotational cycle, thereby exerting an unsteadying influence upon the helicopter. The autogiro had a rotor that functioned something like a windmill. Once set in motion by taxiing on the ground, the rotor could generate supplemental lift; however, the autogiro was powered primarily by a conventional airplane engine.


Fun Facts for Helicopter and Airplane Flight Training for Fargo

Typically, the means of compensating for these unpredictable variations in lift and drag is to manufacture flexible blades connected to the rotor by a hinge. This design allows each blade to shift up or down, adjusting to changes in lift and drag.

The first reference to a rotor system is credited to inventor Leonardo da Vinci, who designed an ‘aerial screw’ in 1480. No full-scale variant was constructed during his lifetime.

Fun Helicopter and Airplane Facts for Fargo

Before potential rotary wing aviators begin actual helicopter training, they must complete the U.S. Army Aviation Center Survival Escape Resistance and Evasion, or SERE-C, course, and Helicopter Ditching and Dunker training. The SERE-C course teaches how to survive in extreme circumstances, including how to find water and food and even how to improvise weapons.


Interesting Helicopter and Fixed-wing Facts for Grand Forks

A helicopter is an engine-driven rotorcraft (a type of aircraft) which uses rotating blades for lift, propulsion, thrust and steering. The word 'Helicopter' comes from the French word 'hlicoptre' which is derived from the Greek words 'helix/helik' (which means 'twisted / curved') and 'pteron' (which means 'wing').

The biggest helicopter was the Russian Mil Mi-12 Homer of 1968 which could lift 40,204 kg up to 2255 m.

Fun Helicopter and Airplane Facts for Grand Forks

On average, a helicopter ground school program takes 12 to 15 weeks to complete. Although there are schools that offer degree programs, traditional programs concentrate on hands-on training and building the flight hours needed for a license.


Fun Helicopter and Airplane Facts for Jamestown

There are over 3 million people in the air on planes at any one time. The worlds first flying car arrives in 2015. Called the Terrafugia it costs $279,000. Terrafugia, a Woburn manufacturer of flying cars has been working on its vehicles for almost eight years. The MIT-born company has been working on two kinds of cars: the Transition, which is scheduled to be released in mid-2016 and can fly at speeds of up to 100 miles per hour at up to 10,000 feet in the air;

Fun Helicopter and Airplane Facts for Jamestown

The best way to become a U.S. military pilot is to prepare academically, physically and mentally before applying for aviation selection and training. Generally, U.S. military pilots need to possess at least a four-year college degree before commencement of aviator training.

FAA - A History of Aircraft Structures Factoid

There are five major stresses to which all aircraft are subjected: Torsion. Torsion is the stress that produces twisting. [Figure 1-14C] While moving the aircraft forward, the engine also tends to twist it to one side, but other aircraft components hold it on course. Thus, torsion is created. The torsion strength of a material is its resistance to twisting or torque.


Interesting Helicopter and Fixed-wing Facts for Mandan

Over 3 million lives have been saved by helicopters in both peacetime and wartime operations since the first person was rescued from the sea in 1944.

The biggest helicopter was the Russian Mil Mi-12 Homer of 1968 which could lift 40,204 kg up to 2255 m.

The first reference to a rotor system is credited to inventor Leonardo da Vinci, who designed an ‘aerial screw’ in 1480. No full-scale variant was constructed during his lifetime.

More Fun Helicopter Facts for Mandan

The first practically successful rotorcraft (the Autogiro) was built by the Spanish engineer Juan de la Cierva, in the year 1923.

If he could design an aircraft in which lift and thrust (forward speed) were separate functions, Cierva speculated, he could circumvent this problem. The autogiro he subsequently invented incorporated features of both the helicopter and the airplane, although it resembled the latter more.


Fun Facts for Helicopter and Airplane Flight Training for Minot

The forerunner of modern helicopters is the Vought-Sikorsky VS-300. It was designed by the Russian American Igor Sikorsky in the year 1939.

Fun Helicopter and Airplane Facts for Minot

On average, a helicopter ground school program takes 12 to 15 weeks to complete. Although there are schools that offer degree programs, traditional programs concentrate on hands-on training and building the flight hours needed for a license.

FAA - A History of Aircraft Structures Factoid

There are five major stresses to which all aircraft are subjected: Compression. Compression is the stress that resists a crushing force. The compressive strength of a material is also measured in psi. Compression is the stress that tends to shorten or squeeze aircraft parts.


Fun Helicopter Facts for Wahpeton

The R22 is the basis for Boeing's Maverick military unmanned aerial vehicle helicopter, and its Renegade version. In 1999, Frontier Systems developed a remotely piloted R22, the Maverick. This aircraft, along with the company, was later acquired by Boeing Phantom Works. In 2003 the U.S. Navy purchased four aircraft, equipped with Wescam EO/IR (Electro-Optical/Infrared) systems.

Helicopter Fun Facts for Wahpeton

As the helicopter approaches the ground, the pilot must then get rid of most of their forward motion and slow the decent using the stored up kinetic energy in the rotors. If done perfectly, the landing will be quite gentle. They accomplish this by executing a flare, pitching the nose up, at the right moment.

In fact, you have a better chance at surviving in a helicopter when the engine fails than you do in an airplane. Helicopters are designed specifically to allow pilots to have a reasonable chance of landing them safely in the case where the engine stops working during flight, often with no damage at all.


Interesting Helicopter and Fixed-wing Facts for West Fargo

In 1951, an American aeronautical engineer Charles Kaman modified his Kaman K-225 helicopter with the turboshaft engine. This modified Kaman K-225 became the world's first gas turbine-powered helicopter. The introduction of turboshaft engines to helicopters enabled the creation of faster, larger, reliable and efficient helicopters.

The FAA and Weather

Inclement weather, including thunderstorms, snowstorms, wind shear, icing and fog, creates potentially hazardous conditions in the nation’s airspace system. These conditions are, by far, the largest cause of flight delays. In an average year, inclement weather is the reason for nearly 70 percent of all delays. Delays translate into real costs for the airlines and the flying public. The cost to an airline for an hour of delay ranges from about $1,400 to $4,500, with the value of passenger time ranging from $35 to $63 per hour. This means that delays cost the airlines and their passengers billions of dollars each year. Each kind of inclement weather presents challenges to the FAA’s air traffic control operation, but perhaps the most disruptive are the convective storms that strike in the summer. Winter storms, while potentially dangerous, often form and move slowly. By contrast, summer storms typically form, grow and move swiftly, covering large swaths of airspace. Many start in the Ohio Valley and move east, impacting air travel in the Northeast, particularly New York. Approximately one-third of all flights in the U.S. “touch” New York, flying to or from John F. Kennedy International, LaGuardia and Newark Liberty airports, connecting with those flights or transiting New York airspace, so severe weather impacting New York has a ripple down effect over the entire country.


Helicopter Fun Facts for Williston

Helicopters are classified as rotary wing aircraft, and their rotary wing is commonly referred to as the main rotor or simply the rotor.

Helicopters are classified as rotary wing aircraft, and their rotary wing is commonly referred to as the main rotor or simply the rotor.

Fun Helicopter and Airplane Facts for Williston

Modern Day Military Pilot Training: Navy pilots must be 18 to 34 for enlisted officers and 19 to 35 for commissioned officers, Air Force pilots must be between 17 and 28 for enlisted officers and 17 and 35 for commissioned officers, and Marine pilots must be 17 to 29 for enlisted officers and 20 to 28 for commissioned officers. All pilots must be United States citizens and have clean criminal records.