Certified Flight Instructor Training in Oklahoma
Cities in Oklahoma with Aviation Schools:
- Ada
- Altus
- Ardmore
- Bartlesville
- Bethany
- Bixby
- Blanchard
- Broken Arrow
- Chickasha
- Choctaw
- Claremore
- Coweta
- Del City
- Duncan
- Durant
- Edmond
- El Reno
- Elk City
- Enid
- Glenpool
- Guthrie
- Guymon
- Jenks
- Lawton
- Mcalester
- Miami
- Midwest City
- Moore
- Muskogee
- Mustang
- Newcastle
- Norman
- Oklahoma City
- Okmulgee
- Owasso
- Ponca City
- Poteau
- Pryor Creek
- Sand Springs
- Sapulpa
- Shawnee
- Stillwater
- Tahlequah
- The Village
- Tulsa
- Wagoner
- Warr Acres
- Weatherford
- Woodward
- Yukon

Certified Flight Instructor Training in Oklahoma
As a new Commercial pilot, the most important next step in your career is to build flight hours through a top Certified Flight Instructor Training Program near Oklahoma. As a CFI you can do just that - fly, instruct, earn money and gain flight hours. As you train new pilots, you build valuable flight hours, while being compensated for your time.
Through the Certified Flight Instructor Training in Oklahoma, students obtain the knowledge necessary to meet the requirements for FAA exams, and demonstrate through practical and written tests, their ability to operate aircraft as pilot-in-command within the aviation industry. StudentsOklahoma will learn the problem-solving skills for flight operations and obtain increased situational awareness with a focus on safety.
Helicopter pilot students gain an understanding of the aerodynamics, components, and flight instruments of the aircraft, specifically those of a Robinson R22 and R44, with the option of Bell 206 B and L series aircraft, including their limitations at high altitude. Instrumentation training will give the student the knowledge to translate information from the aircraft instruments into correct control response in the event of Instrument Meteorological Conditions (IMC).
Helicopter CFI Certificate Program: 30 days and 3 - 30 Flight Hours
The CFI Program Prerequisites:
- 
Private Pilot Certificate;

- Commercial Pilot Certificate; and
- Certified Flight Instructor Certificate.



Time Received:

- 180 Hours Dual VFR Flight Training;

- 5 Hours Dual IFR Flight Training;

- 15 Solo / Supervised Solo;

- 113 Hours Ground Instruction; and

- 100 Hour Pre- and Post- Flight Briefing Instruction.
CFI Training Program Objective
The Certified Flight Instructor Training in Oklahoma is designed to train a student pilot from their beginning initial flight through the completion of their Certified Flight Instructor certificate. The CFI Training in Oklahoma is designed to prepare students to pass both their written and practical FAA examinations through their private pilot, commercial and certified flight instructor certificates.
The CFI Program teaches student pilots how to fly and then helps beginning instructors understand and apply the fundamentals of instruction. The CFI program prepares student pilots for initial entry-level jobs in the industry.

Included in the CFI Training in Oklahoma
Part I - Introduction to High Altitude Flying: With the majority of flight time occurring above 5000ft density altitude (DA), students learn how to determine DA and how high-DA's will affect helicopter performance. Various flight characteristics and weight-and-balance considerations are studied. Training includes the extensive practice of run-on landings, auto-rotations, low rotor RPM, and max performance takeoffs.

Part II - The Mountain Environment: Students learn about how mountain terrain affects environmental conditions. Students are trained in the reconnaissance techniques, as well as, procedures for performing pinnacle and confined area operations at high altitude.
Certified Flight Instructor Careers and Jobs in Oklahoma Fixed Wing CFI
Reports to Chief Flight Instructor – Fixed Wing
Job Description Summary: Flight training schools and programs in Oklahoma are looking for highly motivated CFI’s and MEL’s to instruct for Fixed-Wing programs all over Oklahoma. Qualified Instructors provide flight, simulator, and ground instruction in accordance with Part 61 and 141, FAA regulations, Airmen’s Information Manual, advisory circulars, airport operations, and policies and procedures.
CFI's are responsible for student’s flights, student records, and ensure that each flight course meets course standards, training requirements, and objectives.
Essential Job Functions:
- Perform those flight instructor duties authorized by the Federal Aviation Regulations in accordance with the approved Training Course Outline.
- Ensure all students understand and practice all aspects of Upper Limit’s Aviation Safety Program.
- Regularly schedule each assigned student to ensure satisfactory progress through the course and immediately inform the supervisor of any delays in training or satisfactory progress.
- Responsible for accurately maintaining all appropriate records to include student training records, student logbooks, and computer records.
- Ensure that all assigned students as stipulated in the applicable Training Course Outline meet course standards, training requirements, and objectives.

- Initiate stage check requests for assigned students.
- Responsible for the timely course completion of all flight students assigned, including completion of required paperwork.
- Monitor the maintenance condition of the training aircraft, and inform maintenance personnel of any questionable items.
- Recommend curriculum and courseware improvements when appropriate and develop new curriculum or courseware as assigned.
- File incident reports as necessary to report any observed safety violations, or situations that may affect the safety of flight.
- Contact and meet with potential new students. Conduct tours of facilities and familiarize customers with Upper Limit’s policies, procedures, and flight training courses.
Attend administrative, standardization, in-service training, and instructor development meetings as assigned.
Minimum Requirements:
- FAA Certified Flight Instructor and Airplane Single Engine and Multi-Engine Land
- 200 hours of dual SEL given
- 50 hours of dual MEL given
- Must hold a current FAA Class II Medical Certificate
- C172 S experience with G1000 – minimum 100/hrs
- Pass ’s initial and on-going drug and alcohol testing program.
- Aircraft piloting skills, including familiarity with and ability to perform required flight maneuvers and procedures.
- Knowledge of and ability to apply effective instructional techniques in the classroom and in flight.
- Knowledge of appropriate Federal Aviation Regulations and related administrative and operational procedures and requirements.
- Ability to work well under pressure in a fast-paced and noisy environment while exercising sound judgment at all times.
- Strong customer service skills.
- Productivity and Performance
- Perform an average of 40 instructional hours per two-week pay period. Maintain an 80% pass rate for final review and stage checks.
Preferred Qualifications:
- CFII rating
- Bravo Airspace experience a plus
- Density Altitude flying above 5,000 feet
- Instrument Ground Instructor (IGI) experience a plus
- Advanced Ground Instruction (AGI) preferred
FAA - A History of Airplane Structures Facts for Oklahoma
There are five major stresses to which all aircraft are subjected: Bending. Bending stress is a combination of compression and tension. The rod in Figure 1-14E has been shortened (compressed) on the inside of the bend and stretched on the outside of the bend. A single member of the structure may be subjected to a combination of stresses. In most cases, the structural members are designed to carry end loads rather than side loads. They are designed to be subjected to tension or compression rather than bending.
Aviation Facts - High-Speed Aerodynamics
Listed below are a range of conditions that are encountered by aircraft as their designed speed increases. Subsonic conditions occur for Mach numbers less than one (100–350 mph). For the lowest subsonic conditions, compressibility can be ignored. As the speed of the object approaches the speed of sound, the flight Mach number is nearly equal to one, M = 1 (350–760 mph), and the flow is said to be transonic. At some locations on the object, the local speed of air exceeds the speed of sound. Compressibility effects are most important in transonic flows and lead to the early belief in a sound barrier. Flight faster than sound was thought to be impossible. In fact, the sound barrier was only an increase in the drag near sonic conditions because of compressibility effects. Because of the high drag associated with compressibility effects, aircraft are not operated in cruise conditions near Mach 1. Supersonic conditions occur for numbers greater than Mach 1, but less than Mach 3 (760–2,280mph). Compressibility effects of gas are important in the design of supersonic aircraft because of the shockwaves that are generated by the surface of the object. For high supersonic speeds, between Mach 3 and Mach 5 (2,280–3,600 mph), aerodynamic heating becomes a very important factor in aircraft design. For speeds greater than Mach 5, the flow is said to be hypersonic. At these speeds, some of the energy of the object now goes into exciting the chemical bonds which hold together the nitrogen and oxygen molecules of the air. At hypersonic speeds, the chemistry of the air must be considered when determining forces on the object. When the space shuttle re-enters the atmosphere at high hypersonic speeds, close to Mach 25, the heated air becomes an ionized plasma of gas, and the spacecraft must be insulated ted from the extremely high temperatures.
Certified Flight Instructor Training Available in Oklahoma
Certified Flight Instructors from Oklahoma, find your next job through Aviation Schools Online. Many of the top flight schools in the country use our site to connect with CFIs just like you. Whether you're looking for CFI, MEI, or CFII employment, we're here to match you with the best flight instructor or best flight instructor job available in Oklahoma.
Learning to fly in Oklahoma should be economical and fun, Wouldn't it be easier to enjoy your training knowing that you will accomplish your goals in the least amount of time and expense? Imagine being a private pilot in as little as 60 days! Not everyone can dedicate the time to commit to this type of training, and I have developed training programs for the budget minded flight school student.
Certified Flight Instructor Courses in Oklahoma
The Certified Flight Instructor path is one way for pilots to gain flight time while refining their skills. Instructors will also be able to gain flight hours and experience in order to move on to other opportunities.
To obtain a Flight Instructor Certificate inOklahoma, the student-pilot must be at least 18 years or older, hold a commercial or ATP certificate, hold a third-class medical certificate, and pass the FAA written, along with the Check ride.
The student will receive 15 hours of flight training in the right seat to become comfortable and to be able to perform and demonstrate all maneuvers pertaining to flight training. The student will also receive 20 hours of ground training.
Ground instruction includes fundamentals of instructing, technical support areas, pre-flight preparation, a pre-flight lesson on a maneuver to be performed in flight, aerodynamics and the principals of flight, aircraft systems, meteorology and weather data services, airspace, air traffic control, radio communications, Federal Aviation Regulations, aeromedical factors, aeronautical charts, and associated publications, aircraft performance and limitations, basic and radio navigation, night flying procedures, flight planning, flight maneuvers, and ground operations.
CFI Practical Exam in Oklahoma
Your initial CFI Practical exam is widely recognized as not only the most difficult of all check rides; but also the most important. ‘Checkride” is a term those in the industry use when talking about the FAA Practical Exam. Passing the Certified Flight Instructor ‘Checkride’, or CFI Practical Exam is the moment where you are finally going to set yourself apart from a ‘student’ role, to a marketable role as a Flight Instructor.
This important milestone is what will allow you to start your career. It is well known that here, in the U.S., your first job as a professional pilot will most likely be as a flight instructor inOklahoma. First, we will discuss what it takes to become a Helicopter Instructor Pilot; then we are going to go inside a CFI Practical Exam.
Becoming a Certified Flight Instructor in Oklahoma
Where to start, and what it takes to get there? Anyone who has never flown before will start out as a Student Pilot working towards becoming a Private Pilot Certificate holder. You will need to find a Flight School to begin your training. There are several options out there, and choosing the right one for you is a discussion for another time.
Once you complete your Private Pilot Training and you are ready, you will take a Private Pilot Practical Exam. Practical Exams are the same in regards to how the exam is conducted.
Great! You’re Now a Private Pilot…..What’s Next?
Once you become a Private Pilot Certificate holder, your flight training can go one of three ways. One, you can stop training and remain a Private Pilot. Several people in the General Aviation sector take this route. These are likely the people who are fortunate enough to own their own aircraft and all they want is to be able to legally fly.
They have no ambitions of flying for a living and are content simply being a ‘pilot’. However, most of us are doing this because this is what we want to do for a living. This brings us to the other two options in our flight training career. The most common step is to begin your instrument training.
This is where things get ‘serious’. In order to be a Private Pilot Certificate holder with an Instrument Rating, you are going to dedicate yourself to in-depth ground training, simulator training and flight training with a view limiting device.
At this point in your flight training, you are going to learn how to safely fly the aircraft with no outside references by solely relying on your instruments inside the cockpit. This stage of training is what I like to call, the make or break stage. If you complete this invaluable training, you can walk proud because everyone in aviation will know that you are serious about becoming a career pilot.
Helicopter Facts for Broken Arrow
On twin-rotor craft the rotors spin in opposite directions, so their reactions cancel each other. The helicopter is propelled in a given direction by inclining the axis of the main rotor in that direction. The helicopter's speed is limited by the fact that if the blades rotate too fast they will produce compressibility effects on the blade moving forward and stall effects on the rearwardmoving blade, at the same time.
FAA - A History of Aircraft Structures Factoid for Broken Arrow
The bulk of the FAA handbook is on the airframe of aircraft; specifically, the fuselage, booms, nacelles, cowlings, fairings, airfoil surfaces, and landing gear. Also included are the various accessories and controls that accompany these structures. Note that the rotors of a helicopter are considered part of the airframe since they are actually rotating wings. By contrast, propellers and rotating airfoils of an engine on an airplane are not considered part of the airframe.
Helicopter Facts for Edmond
Helicopters have been widely adopted by the military since their first appearance during the Korean War. During the Vietnam War, they became the preferred platforms for transporting troops and evacuating wounded; in the Persian Gulf conflict helicopter gunships provided air cover for advancing tanks.
FAA - A History of Aircraft Structures Factoid for Edmond
The airframe of a fixed-wing aircraft consists of five principal units: the fuselage, wings, stabilizers, flight control surfaces, and landing gear. Helicopter airframes consist of the fuselage, main rotor and related gearbox, tail rotor (on helicopters with a single main rotor), and the landing gear.
Fun Helicopter Facts for Enid To Share With Friends
British singerJay Kayalso owns an R44 (registry code G-JKAY), which he pilots in the music video to the songWhite Knuckle Ride.
That if the engine stops, the helicopter rotor continues to spin allowing the machine to slowly land, generally without crashing to the ground.
Since around 400 BC, Chinese children have played with bamboo flying toys, and the 4th-century AD Daoist book Baopuzi reportedly describes some of the ideas inherent to rotary wing aircraft
FAA - A History of Aircraft Structures Factoid for Enid
Aircraft structural members are designed to carry a load or to resist stress. In designing an aircraft, every square inch of wing and fuselage, every rib, spar, and even each metal fitting must be considered in relation to the physical characteristics of the material of which it is made. Every part of the aircraft must be planned to carry the load to be imposed upon it.
Helicopter Facts for Lawton
Best known among its developers are the French inventor Louis Breguet and the engineers Igor Sikorsky of the United States and Juan de la Cierva of Spain. The helicopter has become very popular for short-distance transportation, because of its maneuverability and ability to land and take off in small areas; it has been adopted for a wide range of services, including air-sea rescue, fire fighting, traffic control, oil platform resupply, and business transportation.
FAA - A History of Aircraft Structures Factoid for Lawton
The most common aircraft is the fixed-wing aircraft. As the name implies, the wings on this type of flying machine are attached to the fuselage and are not intended to move independently in a fashion that results in the creation of lift. One, two, or three sets of wings have all been successfully utilized. [Figure 1-12] Rotary-wing aircraft such as helicopters are also widespread. This handbook discusses features and maintenance aspects common to both fixed wing and rotary-wing categories of aircraft. Also, in certain cases, explanations focus on information specific to only one or the other. Glider airframes are very similar to fixed wing aircraft. Unless otherwise noted, maintenance practices described for fixed-wing aircraft also apply to gliders.
Fun Helicopter Facts for Midwest City
Chilean president Sebastin Piera owns one of these choppers, and has made several public appearances flying it. Since 2002, Belgian Prince Philippe flies a red R44 for personal leisure, with the uniqueregistry code OO-PFB, which stands for Prins Filip Belgi.
FAA - A History of Aircraft Structures Factoid for Midwest City
The skin of aircraft can also be made from a variety of materials, ranging from impregnated fabric to plywood, aluminum, or composites. Under the skin and attached to the structural fuselage are the many components that support airframe function. The entire airframe and its components are joined by rivets, bolts, screws, and other fasteners. Welding, adhesives, and special bonding techniques are also used.
Helicopter Facts for Moore
In 1937 German designer Heinrich Focke built an aircraft with two huge variable pitch rotors instead of wings and achieved a controlled hover. Months later, German Anton Flettner built the first true helicopter.
If the engine of the helicopter stops, the rotor continues to spin allowing the machine to slowly land, generally without crashing to the ground.
FAA - A History of Aircraft Structures Factoid for Moore
Airframe structural components are constructed from a wide variety of materials. The earliest aircraft were constructed primarily of wood. Steel tubing and the most common material, aluminum, followed. Many newly certified aircraft are built from molded composite materials, such as carbon fiber. Structural members of an aircraft’s fuselage include stringers, longerons, ribs, bulkheads, and more. The main structural member in a wing is called the wing spar.
Fun Helicopter Facts for Norman No One WIll Know But You!
Helicopter is a type of aircraft in which lift is obtained by means of one or more power-driven horizontal propellers called rotors. When the rotor of a helicopter turns it produces reaction torque which tends to make the craft spin also. On most helicopters a small rotor near the tail compensates for this torque.
FAA - A History of Aircraft Structures Factoid for Norman
An aircraft is a device that is used for, or is intended to be used for, flight in the air. Major categories of aircraft are airplane, rotorcraft, glider, and lighter-than-air vehicles. Each of these may be divided further by major distinguishing features of the aircraft, such as airships and balloons. Both are lighter-than-air aircraft but have differentiating features and are operated differently.
Helicopter Facts for Oklahoma City
TheRobinson R44is a four-seat lighthelicopterproduced by theRobinson Helicopter Companysince 1992. Based on the companys two-placeRobinson R22, the R44 features hydraulically-assisted flight controls.
In the early 1930's, Arthur Young, a brilliant young inventor, built and successfully demonstrated a viable, flyable helicopter model. Larry Bell, a successful entrepreneur and founder of the Bell Aircraft Corporation was so impressed with Young's efforts that in 1941 he set the youthful inventor up in a small shop in Gardenville, New York
Fun Helicopter and Airplane Facts for Oklahoma City
The Ditching and Dunker trainer simulates a downed helicopter. Candidates undergo two-day training sessions that teach them how to escape from a helicopter that crashes and lands in water.
Modern Day Military Pilot Training: Army pilots start with flight school and move on to basic combat training. The Air Force's basic pilot training covers 12 weeks and Marine pilots undergo two phases of basic flight training. After basic training, pilots continue with helicopter-specific training. All branches also require the applicant to pass the Armed Services Vocational Aptitude Battery.
Fun Helicopter Facts for Stillwater
Helicopters can be flown across oceans if additional fuel is made available or in-flight refueling is employed.
Myth: Helicopters will drop like a rock when the engine shuts down. In fact, you have a better chance at surviving in a helicopter when the engine fails than you do in an airplane.
It was not until the early 1480s, when Leonardo da Vinci created a design for a machine that could be described as an aerial screw, that any recorded advancement was made towards vertical flight.
Facts of Fort Richardson
U.S. Army Alaska (USARAK), a subordinate element of U.S. Army Pacific (USARPAC), is headquartered at Joint Base Elmendorf-Richardson (JBER). The organization, commanded by a Brigadier General, provides USARPAC with focused, early entry battle command capability and acts as the Joint Force Land Component Commander for homeland defense and civil support in Alaska. USARAK's mission is to be prepared to deploy rapidly in the Pacific theater and elsewhere in support of contingency operations, USPACOM objectives
Helicopter Facts for Tulsa
Since Bell Aircraft Corporation's reputation for helicopter manufacture began to rival its reputation as a builder of conventional aircraft, the company created a separate helicopter division which was headquartered in Fort Worth, Texas. Today, with Bell helicopters flying in more than 120 different countries, they are logging another ten hours every minute of every day. And by 1951, Bell helicopters were in service around the world, breaking records as fast as they were setting them.
FAA - A History of Aircraft Structures Factoid for Tulsa
Many airframe structures are made of more than 50 percent advanced composites, with some airframes approaching 100 percent. The term “very light jet” (VLJ) has come to describe a new generation of jet aircraft made almost entirely of advanced composite materials. [Figure 1-10] It is possible that non-composite aluminum aircraft structures will become obsolete as did the methods and materials of construction used by Cayley, Lilienthal, and the Wright Brothers.