Commercial Pilot Jobs in New Mexico
Cities in New Mexico with Aviation Schools:
- Alamogordo
- Albuquerque
- Anthony
- Artesia
- Aztec
- Belen
- Bernalillo
- Bloomfield
- Carlsbad
- Chaparral
- Clovis
- Corrales
- Deming
- Edgewood
- El Cerro Mission
- Eldorado At Santa Fe
- Espanola
- Farmington
- Gallup
- Grants
- Hobbs
- Las Cruces
- Las Vegas
- Lee Acres
- Los Alamos
- Los Chaves
- Los Lunas
- Los Ranchos De Albuquerque
- Lovington
- North Hobbs
- North Valley
- Paradise Hills
- Portales
- Raton
- Rio Communities
- Rio Rancho
- Roswell
- Ruidoso
- Santa Fe
- Santa Teresa
- Shiprock
- Silver City
- Socorro
- South Valley
- Sunland Park
- Taos
- Truth Or Consequences
- Tucumcari
- White Rock
- Zuni Pueblo
Commercial Pilot Jobs New Mexico
New Mexico Commercial Pilot Salary - How Much Do Commercial Pilots Make?
Commercial Pilot Benefits
Depending on the company you work for, as a commercial pilot you may be eligible to receive health insurance, life insurance, and disability benefits, along with retirement plans and "per diem" pay for longer trips, but these benefits are fairly rare for most commercial pilot jobs.
Seniority Affects Pay
As a new commercial pilot, you can expect to make entry level pay, fly older, less sophisticated aircraft, and fly less desirable routes and schedules. New commercial pilots typically must "pay their dues" in this role in order to accumulate the required hours to apply for better jobs and move up the career ladder into higher paying jobs. Get more information about commercial pilot training.
Pilot Training - What you need to know to fly for a living
Commercial pilots with two years of college or more have an advantage over pilots with only a high school diploma. However, many operations do hire pilots with only a high school education. Pilots who have degrees in aviation-related fields like aeronautics have a better chance of landing a job. If you want to become a commercial pilot, there are two routes to take: military or civilian training. Military training is only a viable option for people with top grades and a four year degree, as competition for military flying slots is fierce, to say the least. The majority of new commercial pilot training occurs at flight schools, flight academies, and colleges with flight training programs.
Where to Find Commercial Pilot Training Near New Mexico
Most schools, academies, and colleges offer pilot training for people with no experience. These programs will have a base price for earning all the required licenses and ratings to become a commercial pilot and begin building your flight hours to find a job. Keep in mind that the quoted price is for people who progress at the "average" rate, so the price can go lower or higher, depending on your personal progress.
Building Commercial Pilot Hours
Since you will need to build flight hours after earning your licenses and ratings, it's important to find a flight school or academy that offers jobs to its graduates. This way, assuming you are professional in your approach to flying and the flight training environment, you are virtually assured of having your first "commercial pilot" job after graduation, and have a chance to build those flight hours and experience you need to move on to your next position. Learn about commercial pilot jobs.
As a commercial pilot, you will be required to take additional training and check rides periodically, depending on the type of operation you work for, and the type of aircraft being flown. Ongoing training is a reality for all commercial pilots.
FAA - A History of Airplane Structures Facts for New Mexico
Airplane structural members are designed to carry a load or to resist stress. In designing an aircraft, every square inch of wing and fuselage, every rib, spar, and even each metal fitting must be considered in relation to the physical characteristics of the material of which it is made. Every part of the aircraft must be planned to carry the load to be imposed upon it.
Aviation Facts - Stability and Control of an Aircraft
An aircraft must have sufficient stability to maintain a uniform flightpath and recover from the various upsetting forces. Also, to achieve the best performance, the aircraft must have the proper response to the movement of the controls. Control is the pilot action of moving the flight controls, providing the aerodynamic force that induces the aircraft to follow a desired flightpath. When an aircraft is said to be controllable, it means that the aircraft responds easily and promptly to movement of the controls. Different control surfaces are used to control the aircraft about each of the three axes. Moving the control surfaces on an aircraft changes the airflow over the aircraft’s surface. This, in turn, creates changes in the balance of forces acting to keep the aircraft flying straight and level.
Commercial Pilot Jobs New Mexico
Commercial Pilot License - Which License and Ratings Will You Need?
To become a commercial pilot in New Mexico, you need to be at least 18 years old (although you can earn your private pilot's license at 17, you must be 18 or older to get your commercial pilot license) and get at least a third class FAA medical certificate. The medical certificate ensures that you are in good overall health, have good vision (corrected or uncorrected is okay) and don't have any disabilities which could affect your ability to fly, although the FAA may grant a waiver for individual cases. Learn about commercial pilot jobs.
List of Licenses and Ratings
Commercial pilots typically hold some or all of the following licenses, ratings, and certificates, depending on the operation:
- Federal Aviation Administration (FAA) Medical First Class - Certificate
- Private Pilot - License
- Commercial Pilot - License
- Instrument Pilot - Rating
- Multi-Engine - Rating
- Type Rating - Rating specific to the type of aircraft being flown, if necessary
The Road to a Commercial Pilot License
The first license you earn is private pilot. Next, most people get their instrument rating, and then go on to the commercial pilot license. Some operations don't require an instrument rating. However, possessing the rating is always beneficial both for piloting skills and getting jobs. If you'll be flying multi-engine aircraft (and you probably will), you'll need to earn a multi-engine rating, and, if flying larger aircraft (over 12,500 pounds gross weight) or turbo jet aircraft, you'll also need a type rating for that specific model or family of aircraft. Many companies offer type rating training specifically for this purpose. Get more information on commercial pilot training.
New Mexico Commercial Pilot License Tests
Most, but not all, FAA licenses and ratings require that you pass written, oral, and practical (check ride) tests given by approved testing centers and designated examiners.
Accelerated Flight Training - Condensed training helps pilots retain info, earn more ratings, and get jobs
No matter how you look at it, flight training is a lengthy process. There are many new things to learn and hundreds of flight hours to gain. When it comes down to it, flight training can only be condensed so much before it bumps up against regulations. This presents a bit of a problem to someone looking to start a career in aviation. Training costs money, but it's going to be a while before flying will pay. So what's the best solution? Accelerated training. Accelerated flight training offers some notable benefits including being good for career pilots, quick progression through ratings, and increased job placement opportunities. Great for Career Pilots
Accelerated training is great for career pilots. It allows the student to condense their training into a few weeks or months rather than years. This works by allowing the student to fly multiple lessons per week while also taking consolidated ground school. The nature of the training typically demands the student train like a full-time job--eight hours a day, five days a week. This is great for someone who's looking to get started with a career in the quickest amount of time. It's unfortunately not so great for someone who can't devote more than a few hours per week.
Most accelerated training programs function similarly to military training in that students alternate between flying and classroom instruction before entering a phase of longer flights. Some accelerated programs even dispatch students and aircraft on a series of long flights that are intended to provide a large amount of flight time and allow the student a more varied cross-country experience.
Quick Progression Through Ratings
This type of training is primarily designed to fast track students to ratings. Rather than taking six months to obtain a private pilot certificate or an instrument rating, it can take as little as fourteen days. How can you take something that takes six months and effectively learn it in fourteen days? Attend ground school and flight training eight hours per day. The bottom line on all flight training is the more you do it, the more you retain. Accelerated programs are based on this concept and their success stems from the fact that their students are immersed in flying so much that they can't help but learn.
Job Placement Opportunities
Most of the larger accelerated flight training schools offer job placement to graduates. They have agreements with some airlines and often directly offer employment to some of the graduates. This is a great asset to someone looking to break into the aviation career field. When considering job placement agreements, some schools offer actual job placements while some offer guaranteed interviews. Either is better than nothing no matter how you look at it. It's debatable, but the single biggest employer of many accelerated flight training program graduates is often the schools offering the programs. After all, they need flight instructors to teach their students and someone who's familiar with the program is a great asset.
As you can see, for someone trying to launch into an aviation career, accelerated flight training has a number of benefits. Even people that are just trying to get several ratings at once can benefit from an accelerated program. So if you're looking for a flying career and you have time to devote to training, consider an accelerated program.
Helicopter Facts for Alamogordo
The biggest helicopter was the Russian Mil Mi-12 Homer of 1968 which could lift 40,204 kg up to 2255 m.
At the end of 2011, Bell had approximately 10,700 employees, of which 19% were located outside the U.S. Major facilities are located in Fort Worth, Texas; Amarillo, Texas; Corpus Christi, Texas; Ozark, Alabama; Bristol, Tennessee; and Mirabel, Quebec, Canada. One third of the world fleet carry the Bell Helicopter brand.
Fun Helicopter and Airplane Facts for Alamogordo
Helicopters were developed and built during the first half-century of flight, with the Focke-Wulf Fw 61 being the first operational helicopter in 1936. Some helicopters reached limited production, but it was not until 1942 that a helicopter designed by Igor Sikorsky reached full-scale production, with 131 aircraft built.
Fun Helicopter Facts for Albuquerque
The R-22 is a single-engined helicopter with a semi-rigid two-bladed main rotor and a two-bladed tail rotor. The main rotor has a teetering hinge and two coning hinges, the tail rotor has only a teetering hinge.
Only 5% of the worlds population have ever been on an airplane. Flight is not the safest form of travel. The bus is on all measures. The motorcycle is the most dangerous on all measures.
Fun Helicopter Facts for Albuquerque
Helicopters can be flown across oceans if additional fuel is made available or in-flight refueling is employed.
As the helicopter approaches the ground, the pilot must then get rid of most of their forward motion and slow the decent using the stored up kinetic energy in the rotors. If done perfectly, the landing will be quite gentle. They accomplish this by executing a flare, pitching the nose up, at the right moment.
In fact, you have a better chance at surviving in a helicopter when the engine fails than you do in an airplane. Helicopters are designed specifically to allow pilots to have a reasonable chance of landing them safely in the case where the engine stops working during flight, often with no damage at all.
Helicopter Facts for Clovis
Globally recognized for world-class customer service, innovation and superior quality, Bell's international workforce serves customers flying Bell aircraft in more than 140 countries. Though most earlier designs used more than one main rotor, it is the single main rotor with anti-torque tail rotor configuration that has become the most common helicopter configuration.
Fun Helicopter and Airplane Facts for Clovis
Helicopters were developed and built during the first half-century of flight, with the Focke-Wulf Fw 61 being the first operational helicopter in 1936. Some helicopters reached limited production, but it was not until 1942 that a helicopter designed by Igor Sikorsky reached full-scale production, with 131 aircraft built.
Helicopter Facts for Farmington
Bell Helicopter is an American rotorcraft manufacturer headquartered in Hurst, Texas, near Fort Worth. A division of Textron, Bell manufactures military helicopter and tiltrotor products in and around Fort Worth, as well as in Amarillo, Texas, and commercial rotorcraft products in Mirabel, Quebec, Canada. Bell provides training and support services worldwide.
Fun Helicopter Facts for Farmington
Two piston-engined prototypes were built followed by a single example of a turbine-engined variant designated A.104BT. No production resulted.
Helicopter Spotlight for Farmington
Agusta A.104 Helicar was an Italian prototype light helicopter flown in December 1960. It was a slightly enlarged version of the A.103 and added a second seat beside the pilot's seat. The cockpit was enclosed by a perspex bubble with the engine at the rear and the tail rotor carried on an enclosed boom.
Owing to their versatility in flight, helicopters have a wide variety of applications. They are used for traffic surveillance, transportation, news gathering, aerial photography, crop-spraying, tourism, searching and rescuing etc.
Helicopter Facts for Hobbs
Helicopters are safest to fly in bad weather because they can slow down, stop and/or fly backwards or sideways.
Every Bell Helicopter is backed by around-the-clock, award winning customer support. Bell Helicopters comprehensive, global service network is rated #1 in the industry. On every continent, in every region, we stand behind each aircraft with the expertise, parts and service needed to meet your mission requirements.
Helicopter Spotlight for Hobbs
The Bell AH-1Z Viper is a twin-engineattack helicopter based on the AH-1W SuperCobra, that was developed for theUnited States Marine Corps. The AH-1Z features a four-blade, bearingless, composite main rotor system, uprated transmission, and a new target sighting system. The AH-1Z is part of the H-1 upgrade program. It is also called \Zulu Cobra in reference to its variant letter.
Fun Helicopter Facts for Las Cruces
The first version was produced as the R22, followed by the R22 HP, R22 Alpha, R22 Beta and R22 Beta II. Superficially, the aircraft appear similar. The R22 HP was fitted with a 160 bhp Lycoming 0-320-B2C engine, an increase of 10 bhp (7.5 kW) over the original R22.
Fun Helicopter and Airplane Facts for Las Cruces
Become a commercial helicopter pilot: Apply for a flight instructor job at a flight school. An air ambulance company may require its pilots to have a minimum of 1000 hours flight time. Teaching people how to fly is a legitimate way of building up your flight hours.
FAA - A History of Aircraft Structures Factoid
There are five major stresses to which all aircraft are subjected: Bending. Bending stress is a combination of compression and tension. The rod in Figure 1-14E has been shortened (compressed) on the inside of the bend and stretched on the outside of the bend. A single member of the structure may be subjected to a combination of stresses. In most cases, the structural members are designed to carry end loads rather than side loads. They are designed to be subjected to tension or compression rather than bending.
Fun Helicopter Facts for Rio Rancho
Instead of a floor-mounted cyclic stick between the pilot's knees, the R22 uses a unique teetering T-Bar control connected to a stick that emerges from the console between the seats. This makes it easier for occupants to enter and exit the cabin and reduces chances for injury in the event of a hard landing.
Fun Helicopter and Airplane Facts for Rio Rancho
Every U.S. military branch puts men and women applying for pilot training through its version of an initial flight training course. U.S. military pilot selection and initial flight training is typically designed to weed out unqualified applicants.
Fixed-Wing Aircraft Factoid
Truss-Type: A truss is a rigid framework made up of members, such as beams, struts, and bars to resist deformation by applied loads. The truss-framed fuselage is generally covered with fabric. The truss-type fuselage frame is usually constructed of steel. A truss-type fuselage. A Warren truss uses mostlydiagonal bracing.An airframe using monocoque construction. The most common airframe construction issemimonocoque tubing welded together in such a manner that all members of the truss can carry both tension and compression loads.In some aircraft, principally the light, single engine models, truss fuselage frames may be constructed of aluminum alloy and may be riveted or bolted into one piece, with cross-bracing achieved by using solid rods or tubes.
Fun Helicopter and Airplane Facts for Roswell
By derating the engine at sea level, the R22 achieves acceptable high-altitude performance without use of supercharging or turbocharging, thus saving the weight, complexity, unreliability, and shortened engine life of a forced induction system.
Fun Facts About Helicopters
While light-weight, general-purpose helicopters often have a two-bladed main rotor, heavier craft may use a four-blade design or two separate main rotors to accommodate heavy loads.
The first reference to a rotor system is credited to inventor Leonardo da Vinci, who designed an aerial screw in 1480. No full-scale variant was constructed during his lifetime.
During World War I, Hungarian engineer Theodore von Karman constructed a helicopter that, when tethered, was able to hover for extended periods. Several years later, Spaniard Juan de la Cierva developed a machine he called an autogiro in response to the tendency of conventional airplanes to lose engine power and crash while landing.
R22 Helicopter Trivia for Santa Fe
The R22 uses a horizontally mounted Lycoming O-320 (O-360-J2A on the Beta II), four-cylinder, air-cooled, normally aspirated, carburetor-equipped piston engine. It is fueled with 100LL grade aviation gasoline.
The capability to efficiently hover for extended periods of time allows a helicopter to accomplish tasks that fixed-wing aircraft and other forms of vertical takeoff and landing aircraft cannot perform.
Fun Helicopter and Airplane Facts for Santa Fe
U.S. military primary flight training teaches the basics of flight and flying applicable to most aviation situations. Depending on the military branch, once primary flight training is completed the trainee requests intermediate training in an aircraft type, such as jets.
Fixed-Wing Aircraft Factoid - Wing Configurations
Both the leading edge and the trailing edge of the wing may be straight or curved, or one edge may be straight and the other curved. One or both edges may be tapered so that the wing is narrower at the tip than at the root where it joins the fuselage. The wing tip may be square, rounded, or even pointed. Figure 1-19 shows a number of typical wing leading and trailing edge shapes.
Fun Helicopter and Airplane Facts for South Valley
Bell Helicopter is an industry-leading producer of commercial and military helicopters and the pioneer of tiltrotor aircraft. One-third of the world's operating vertical lift aircraft are made by Bell, including advanced military aircraft and a variety of commercial single- and twin-engine helicopters.
Helicopter Structures
Airframe The airframe, or fundamental structure, of a helicopter can be made of either metal or wood composite materials, or some combination of the two. Typically, a composite component consists of many layers of fiber-impregnated resins, bonded to form a smooth panel. Tubular and sheet metal substructures are usually made of aluminum, though stainless steel or titanium are sometimes used in areas subject to higher stress or heat. Airframe design encompasses engineering, aerodynamics, materials technology, and manufacturing methods to achieve favorable balances of performance, reliability, and cost.